| Product Information |
KBD4002 Multiplexer Keyboard
FULL-FUNCTION, FIXED/VARIABLE-SPEED, PTZ CONTROL
The KBD4002 Keyboard is an economical full-function keyboard controller
for the MX4000 Genex Multiplexer and the MX4000SVR Genex Multiplexer
Server.
There are two modes of operation – multiplexer mode and multiplexer
server mode – depending on whether the keyboard is connected to a
multiplexer or to a server.
In the multiplexer mode, a single keyboard interfaces up to 16 multiplexers
that are daisy-chained together. With 9-channel multiplexers, the
keyboard can control up to 144 cameras; with 16-channel multiplexers,
up to 256 cameras can be controlled.
In the multiplexer server mode, up to four keyboards can be connected
to a server, which interfaces up to eight multiplexers. Up to 72 cameras
can be controlled with 9-channel multiplexers or 128 cameras
with 16-channel multiplexers.
In addition to performing all the control functions that can be done
from the front panel of the multiplexer, the keyboard also features
additional keys for complete operation of the fixed-speed and variable-
speed pan, tilt, and lens functions. Control of variable-speed pan
and tilt receivers is accomplished with the number keypad using the
"select-a-speed" feature. With select-a-speed, each digit (1-9) signifies
a relative pan and tilt speed. The number 1 represents the slowest
speed available while the number 9 speed equates to turbo pan
(for those receivers capable of supporting turbo pan speed). When
the number 9 is entered, the tilt will operate at the number 8 speed.
Entering the number 0 sets a mid-range speed.
Under control of the keyboard, cameras can be viewed on the main and
spot monitor outputs of the multiplexer. On the main monitor, select full
screen or multiple screen (4, 9 or 16) images or picture-in-picture display.
Get a closer look with the 2X and 4X zoom feature.
Use the spot
monitor for control of pan/tilt and zoom functions, and to operate presets,
auxiliaries, and patterns.
The spot monitor shows a full screen view
only and does not have the zoom feature. When used with a Genex multiplexer, the KBD4002 keyboard is capable
of Coaxitron® control of pan, tilt, and lens functions, inluding
setting and calling presets and patterns. (see note on back page)
The keyboard provides two methods of camera addressing. One
method allows selection of cameras by entering the multiplexer unit
ID (1-16) followed by the desired camera (1-16). The second method
allows selection of cameras by entering an incremental camera number
(unit 1 = cameras 1-16, unit 2 = cameras 17-32, etc.). |
|
|
Product Features |
- Economical Full-Feature Keyboard
- Select up to 256 Cameras from One Keyboard Connected to a String of MX4000 Genex® Multiplexers
- Select up to 128 Cameras from a Maximum of Four Keyboards through an MX4000SVR Genex Multiplexer Server
- Variable-Speed Control of Pan/Tilt Units Made by Keypad Selection Using “Select-a-Speed” Feature
- Preset Position and Pattern Control
- Main and Spot Monitor Control
- Digital Zoom Control on Main Monitor
- Auxiliary Operation
|
|
|
Product Specifications |
|
Input Voltage |
12VAC or +/- 12VDC |
| Power Consumption |
1 Watt |
| Keyboard Interface |
RS-485 (25-foot flat cable supplied) |
| Connector Type
Data |
RJ-45 8-pin modular (female) |
| Keyboard Keypad |
Mechanical |
|
Digital Display |
Two red seven-segment LEDs |
|
Main/Spot
Monitor Indicators |
Two green LEDs |
|
Operating Temperature |
20° to 120°F (-7° to 49°C) |
|
Humidity |
10% - 90% non-condensing |
|
Dimensions |
2.25" H x 9.50" W x 7.125" L
(5.72 x 24.13 x 18.10 cm) |
|
Weights |
Unit: 2.1 lb (0.97 kg)
Shipping: 3lb (1.35 kb) |
| Certifications |
• CE, Class B
• FCC, Class B |
| Accessories |
25-foot (7.6 m) RJ-45 data cable |
| Optional Accessories |
KBDKIT: Remote keyboard wiring kit. Required if using Remote
Keyboard Port on multiplexer server or if extending
Local Keyboard Port beyond 25 feet (7.6 m).
Maximum distance of 4,000 feet (1,219 m) to last
keyboard in daisy chain. Use shielded twisted pairs
such as Belden 9843 or equivalent that meets RS-485
standards. (One kit for each keyboard required.)
KBDKIT-X: Same as KBDKIT except 230 VAC to 12 VAC
transformer |
|
|
|
Photo |
|
|
|
Dimensions |
|
2.25" H x 9.50" W x 7.125" L
(5.72 x 24.13 x 18.10 cm)
|
| Pricing |
Please Call for Pricing 1-888-919-2263or
|
|
Documentation & Video |
|
|
Contact A Sales
