| Product Information |
The KBD200A Keyboard is a full-function, desktop keyboard controller
that can be used in a variety of applications.
Left, right, up, and down keys provide precise pan and tilt control of
fixed-speed and variable-speed receivers. Variable-speed equipment
is controlled by programming the speed with the keyboard.
Additional keys select cameras and monitors; operate presets, patterns,
auxiliaries, and sequences; open and close the iris; zoom and
focus the lens; and start and stop auto, frame, and random scanning.
The keyboard can be used in four modes of operation: CM6700 Mode,
CM6800 Mode, ASCII Mode, and Direct Mode.
In the first two modes, the keyboard is plugged into a CM6700,
CM6800, or CM9760-SAT Switcher/Controller Unit (SCU) and is used
to program and operate the SCU. The maximum number of keyboards
per unit is eight (CM6700 and CM6800-32X6), sixteen (CM6800-48X8,
CM6800E-48X8, and CM6800-96X16), or four (CM9760-SAT). In
CM6700/CM6800 applications, the keyboard can control cameras
connected directly to the SCU or through an MX4000 Series Genex
Multiplexer.
ASCII Mode is the same as the CM6700 and CM6800 Modes except
that the keyboard communicates with the SCU over dial-up or fiberoptic
communication lines. An RS-232 or RS-422 interface is required
for the CM6700. ASCII Mode for the CM6800 requires RS-232 or
RS-485. Only one keyboard can be used with an SCU in ASCII Mode.
If additional keyboards are required, they can be connected directly
to the SCU and used in CM6700/CM6800 Mode. |
|
|
Product Features |
- Keyboard to Control: CM6700/CM6800/CM9760-SAT Matrix Switchers, Genex® Multiplexer When Used with CM6700 and CM6800, Up to 16 Receivers Directly from Keyboard (such as Spectra® and Esprit®)
- Multi-Speed Control of PTZ Functions
- Preset Position and Pattern Control
- Auxiliary Operation
- Auto/Random/Frame Scanning
- Programming of CM6700/CM6800/CM9760-SAT/CM9760-MDA
- Automatic Recognition of CM6700/CM6800 and Direct Modes
- Keyboard Control of all CM6800 External Auxiliaries
|
|
|
Product Specifications |
|
Input Voltage |
12VAC or +/- 12VDC |
| Power Consumption |
1 Watt |
| Keyboard Connector |
RJ-45, 8-pin, modular (female) |
| Keyboard Communication |
CM6700 Mode/CM6800 Mode
- Interface- RS-485
- Protocol- Pelco ASCII
- Baud- 9600
- Communication Parameters-
8 Data bits, odd parity, 1 stop bit
Direct Mode
- Interface- RS-422
- Protocol- Pelco P
- Baud- 4800
- Communication Parameters-
8 Databits, no parity, 1 stop bit
ASCII Mode
- Interface: CM6700: RS-232, RS-422
- Interface: CM6800: RS-232, RS-485
- Protocol: Pelco "non-polled" ASCII
- Baud: 9600
- Communication Parameters:
8 Databits, odd parity, 1 stop unit |
| Keyboard Keypad |
Electromechanical |
| Display |
Red LED, 7-segment, 2 cells |
|
Multiplexer Mode
Indicator |
Green LED |
|
Dimensions |
2.25" H x 8.125" W x 7.125" D
(5.72 x 20.64 x 18.10 cm) |
|
Unit Weight |
2.1 lb (0.95 kg) |
|
Shipping Weight |
4 lb (1.81 kg) |
|
Ambient Operating
Temperature |
20° to 120°F (-7° to 49°C) |
|
Humidity |
10-90% non-condensing |
|
Certifications |
• CE, Class A
• UL Listed
• UL Listed to Canadian safety standards
• FCC, Class A |
| Supplied Accessories |
25-foot (7.6 m) RJ-45 data cable |
| Optional Accessories |
KBDKIT: Remote keyboard wiring kit. Required if connecting
KBD200A Keyboards to the Remote Keyboard Port
on the SCU (6700/6800 Mode) or when using a
single keyboard in the Direct or ASCII Mode
applications. Includes two RJ-45 wall blocks and
one 120 VAC to 12 VAC transformer. Maximum
cable distance for RS-422/RS-485 communication
over 24-gauge wire is 4,000 feet (1,219 m). Use
shielded twisted pairs cable that meets basic
requirements for RS-422/RS-485 applications. (One
wall block and transformer required for each
keyboard.)
KBDKIT-X: Same as KBDKIT except includes 230 VAC to 12 VAC
transformer |
|
|
|
Photo |
|
|
|
Dimensions |
|
2.25" H x 8.125" W x 7.125" D
(5.72 x 20.64 x 18.10 cm)
|
| Pricing |
Please Call for Pricing 1-888-919-2263or
|
|
Documentation & Video |
|
|
Contact A Sales
